Program Magnavox Universal Remote: Do you get tired of switching remote controls? You may now employ various devices for entertainment, including the TV, cable box, DVD, VCR, home theatre, and others. Regrettably, each of these comes with its controller, making switching between them a chore. But what if you could control them all with a single device? That’s exactly what the Magnavox universal remote accomplishes.
The Philips Magnavox universal remote, one of the most popular, is simple to program. It’s also extremely useful and easy to use, making it ideal for all of your entertainment systems. Here’s a step-by-step guide to program Magnavox universal remote for usage on your devices.
How To Program Magnavox Universal Remote?
There are 2 ways you can go about this:
1 – Using the Philips Magnavox remote codes; and
2 – Using the code search method.
Each of these strategies is described in full below:
1. Using The Magnavox Universal Remote Codes (Direct Code Entry)
Follow the steps below to program your Magnavox Universal remote.
1 – Turn on your TV (or other entertainment devices), then check the remote to make sure the batteries are working. Also, Make sure no other entertainment devices are turned on.
2 – Press and hold the TV and SEL buttons on the controller for three seconds, or until the button lights up (depending on the device, replace the TV button with the DVD/AUX, CBS/CATV, or VCR).
3 – Enter your device’s Philips Magnavox TV code or other corresponding code.
4 – Press the TV button or other corresponding buttons to store the code.
The remote is now programmed to your entertainment system. Increase or decrease the volume, change the channel, or turn it off and on to see whether it works.
2. Using The Auto Search Option (Code Search)
What if you don’t have the Magnavox TV or other entertainment systems’ necessary codes? Don’t be concerned. You may still use the code search option to program your controller. Here’s how you can do it:
1 – Turn on the device you are programming and ensure no other entertainment system is on.
2 – Check the remote to make sure the batteries are working.
3 – Point the remote to your device and press the TV (or other corresponding buttons for your system) and SEL button simultaneously until it lights up.
4 – Press the power button to enter the code search mode.
5 – Press the CH+ or CH- button several times (waiting a few minutes between each press) until your device changes channel (Note: this method works for TVs, cable boxes, streaming boxes, and other devices that can change channels). You can press the power button continuously until the device shuts off for DVDs and other auxiliary systems).
You’ve discovered the correct code when the device switches channels or shuts off. To store the code and complete programming the remote control, press the correct device button (TV, DVD/AUX, CBS/CATV for cable box, or VCR).
List Of Philips Magnavox Universal Remote Codes
To establish the proper frequency for your device’s receiver, you’ll need to enter the relevant Magnavox universal remote 4 digit codes (some devices have 3 or 5 codes) while programming a controller. Here are a few examples of these codes:
Universal Remote Magnavox TV Codes
1 – 1004
2 – 1007
3 – 1018
4 – 1047
5 – 1053
6 – 1056
7 – 1057
8 – 1059
9 – 1060
10 – 1061
11 – 1083
Magnavox DVD Codes
1 – 2002
2 – 2018
3 – 2089
4 – 2241
5 – 2245
6 – 2293
7 – 2318
8 – 2320
9 – 2321
10 – 2327
Magnavox VCR Codes
1 – 3016
2 – 3036
3 – 3051
4 – 3128
5 – 3152
6 – 3153
7 – 3183
8 – 3190
9 – 3206
10 – 321
Universal Remote Codes For Magnavox Cable Boxes
1 – 2000
2 – 2002
3 – 2004
4 – 2006
5 – 2008
6 – 2010
7 – 2012
8 – 2016
9 – 20018
10 – 2020
11 – 2022
12 – 20224
13 – 2026
14 – 1014
15 – 2044
16 – 2046
17 – 2048
While some codes work on a variety of devices, some are device-specific. If the previous methods do not work, search out more Magnavox remote codes for your device.
Also, Check:
Wrapping Up: Program Magnavox Universal Remote
Are you tired of your numerous remote controls? Remove them and replace them with a Magnavox remote control. You can program it to work with all of your entertainment systems, including your TV, cable box, DVD or VCR player, and audio system. The instructions above will assist you in programming your Magnavox universal remote.