This essay will go through all of the strategies in depth to Access BIOS in Windows 10.
Microsoft Windows 10 includes several advanced tools that may assist you in increasing the efficiency of your device. One of the tools used to troubleshoot most Windows 10 issues is the Advanced boot options feature. The more you use a smartphone, the more you will want to customize it. Keep your system up-to-date to avoid system problems. What if you run into any issues? Windows advanced boot options allow you to reset your PC, boot into a different operating system, restore it, use “Startup Repair” to fix startup issues, and start Windows in Safe Mode to troubleshoot the other problems.
Moreover, on older devices (Windows XP, Vista, or Windows 7), the BIOS could be accessed by pressing the F1 or F2 key, or the DEL key, while the computer was booting. The User Extensible Firmware Interface (UEFI) is a new BIOS found in modern devices (UEFI). If you use a one-of-a-kind device, your system will use UEFI mode rather than the legacy BIOS (Basic Input/Output System). So, in Windows 10, how do I access the Advanced Boot Options and the BIOS? There are several ways to gain access to this feature, each with its purpose.
Table of Contents
6 Best Ways to Access BIOS in Windows 10 (Dell/Asus/ HP)
If you have access to your Desktop
Method 1: Press & Hold Shift Key and Restart your device
Method 2: Access BIOS options through Settings
Method 3: Access BIOS options through Command Prompt
If you don’t have access to your computer’s desktop
Method 1: Force Windows Operating System to Start in Boot Options
Method 2: Windows Recovery Drive
Method 3: Windows Installation drive/disc
Final Words
6 Best Ways to Access BIOS in Windows 10 (Dell/Asus/ HP)
Must ensure to create a restore point just in case something goes wrong.
If you have access to your Desktop
If your Windows operating system is operational and you have access to your desktop, the methods listed below will let you access the BIOS Windows 10.
Method 1: Press & Hold Shift Key and Restart your device
1. Press the Start button, followed by the Power symbol.
2. Select Restart from the power menu while holding down the Shift key.
3. Restart your smartphone while holding the Shift key down.
4. When the system restarts, go to the Choose an option screen and select Troubleshoot.
5. Select Advanced Options from the Troubleshoot page.
6. Select UEFI Firmware Settings from the Advanced Options menu.
Finally, press the Restart button to restart the computer. When your computer restarts after this process, you will be in the BIOS.
After a restart, Windows will launch into the BIOS menu. It is the quickest method for accessing the BIOS in Windows 10. All you have to do is remember to hold down the Shift key while rebooting your device.
Method 2: Access BIOS options through Settings
Unfortunately, if you don’t have access to the previous approach, you can use this one instead. It may be helpful to navigate to the System Settings section from this point.
1. Go to Windows Settings and click on the Update & Security tab.
2. From the left pane, select the Recovery option.
3. Locate and select the Restart Now option under Advanced Startup.
4. When the system restarts, go to the Choose an option screen and select Troubleshoot.
5. Select Advanced Options from the Troubleshoot page.
6. Select UEFI Firmware Settings from the Advanced Options menu.
7. Finally, click the Restart button. When your computer restarts after this process, you will be in the BIOS.
Method 3: Access BIOS options through Command Prompt
Advanced Boot Options can be accessed via the command prompt if you are a techie.
1. Select Command Prompt or Windows PowerShell with administrative privileges by pressing Windows +X.
2. In the elevated command window, type shutdown.exe /r /o and press Enter.
Once you run the command, you will be notified that you are being signed out. When you close it, Windows will restart with boot options. However, restarting will take some time. Repeat steps 4 through 7 from the previous technique to enter the BIOS in Windows 10.
If you don’t have access to your computer’s desktop
If your Windows operating system isn’t working correctly and you cannot access your desktop, the procedure outlined below will help you access the BIOS in Windows 10.
Method 1: Force Windows Operating System to Start in Boot Options
If Windows fails to boot correctly, it will enter advanced boot options mode. It is a standard feature of Microsoft’s Windows operating system. If your Windows fails to boot properly due to a crash, it will start automatically in Advanced boot options. What if Windows freezes while booting? Yes, it may happen to you.
In that case, you must force Windows to boot into Advanced Boot Options.
1. Turn on your device and, as soon as the Windows logo appears, press & hold the Power button until your system shuts down.
Note: Remember that you will have to restart the process if it gets past the boot screen.
2. Repeat this three times in a row because when Windows 10 fails to boot three times, it automatically enters Automatic Repair mode the fourth time.
3. When the computer boots for the fourth time, it will prepare Automatic Repair and prompt you to choose Restart or Advanced.
To reach the BIOS menu in Windows 10, repeat steps 4–7 from approach 1.
Method 2: Windows Recovery Drive
If the forced shutdown method fails, you can use the Windows recovery disc. It might help resolve your Windows startup problem. For this, you’ll need a Windows recovery drive or disc. If you have one, that’s fantastic. Otherwise, you’ll have to set one up on one of your friends’ systems. Next, you connect your Windows recovery drive (CD or Pen drive) to your device and restart it with it.
Method 3: Windows Installation drive/disc
By using a Windows installation drive or disc, you can also gain access to advanced boot options. Connect the bootable drive or disc to your computer and restart it.
1. Begin by booting your computer from the Windows 10 installation USB or DVD.
2. Select your preferred language and then press the Next button.
3. Finally, at the bottom, click the “Repair your computer” button.
4. This will bring up the Advanced Startup Option, where you must select Troubleshoot.
5. Select Advanced Options from the Troubleshoot page.
6. Select UEFI Firmware Settings from the Advanced Options menu.
7. Finally, click the Restart button. When your computer restarts after this operation, you will be in the BIOS menu.
ALSO READ: BobMovies Alternatives
Final Words
Regardless of whether your device is working correctly or not, you can always access the BIOS in Windows 10 using one of the methods listed above. If you are still having trouble accessing BIOS, please leave a comment in the section below.